PIKO BLX Micro Flight Controller

PIKO BLX Micro Flight Controller

PIXHAWK OSD

PIXHAWK OSD

PIXHAWK 433MHZ COMBO

was ₹20,799.99 Special Price ₹16,804.00

* Price is inclusive of 18% GST

Availability: Out of stock
Out of stock
SKU
B81516

PIXHAWK is a high-performance autopilot-on-module suitable for fixed wing, multi rotors, helicopters, cars, boats and any other robotic platform that can move. It is targeted towards high-end research, amateur and industry needs and combines the functionality of the PX4FMU + PX4IO.

 
The flagship Pixhawk module will be accompanied by peripherals,including 433MHz Radio telemetry kit,power module,GPS,buzzer,etc.
 
Notice:The pixhawk combo is not made by 3DR but third party, we guarantee all parts functioning and firmware upgradable.
 
Pixhawk Autopilot:
-168 MHz/252 MIPS Cortex-M4F
-14 PWM/Servo outputs (8 with failsafe and manual override, 6 auxiliary, high-power compatible)
-Abundant connectivity options for additional peripherals(UART, I2C, CAN)
-Integrated backup system for in-flight recovery and manual override with dedicated processor and stand-alone power supply(fixed-wing use)
-Backup system integrates mixing, providing consistent autopilot and manual override mixing modes(fixed wing use)
-Redundant power supply inputs and automatic failover
-External safety switch
-Multicolor LED main visual indicator
-High-power, multi-tone piezo audio indicator
microSD card for high-rate logging over extended periods of time
 
433MHz Radio Telemetry:
-Small size,light weight
-433Mhz frequency band
-Receiver sensitivity to -117 dBm
-Transmit power up to 20dBm (100mW)
-High quality CP2102 USB to TTL chips
-Open source firmware
-Frequency hopping spread spectrum (FHSS)
-2-way full-duplex communication through adaptive TDM
-Error correction corrects up to 25% of bit errors
-Based on Si1000 micro controller and the Si4432 wireless module.
 
Ublox Neo-M8N GPS
-167 dBm navigation sensitivity
-Navigation update rate up to 10 Hz
-Cold starts: 26s
-Low noise 3.3V regulator
-Protective case
 
Power Module:
Deans Plug
Max input voltage: 30V
Max current sensing: 90A
Voltage and current measurement configured for 5V ADC
Switching regulator outputs 5.3V and 3A max
6P molex cable plugs directly to APM/Arduflyer 2.5's 'PM' connector
 
Purchase Includes:
-1*Pixhawk Autopilot
-1*3DR 433MHzRadio Telemetry Module Air with the case
-1*3DR 433MHzRadio Telemetry Module Ground with the case
-1*CRIUS MAVLink-OSD Board
-1*Power Module V1.0
-1*Ublox Neo-M8N GPS
-1*GPS Foldable Stand
-1*I2C Splitter Expand Module with 4pin Cable
-1*External LED and USB Module with 6 to 4pin Cable
-1*Glass Fiber Cushioning Seat
-1*Buzzer
-1*Micro USB Cable
-1*PPM Encoder with 2 Cables
-1*4GB MicroSD Card

 

We found other products you might like!