ORIGINAL Matek HUBOSD Eco X-Type W/XT60

HUBOSD has been engineered to provide the highest possible performance and reliability in a 46*36mm & 4 layers PCB. It is a multifunctional HUB with PDB, BEC 5V/2A &12V/500mA, Current sensor 140A, STOSD. It is specially made for the mini FPV Quad. The BEC 12V is linear regulator, no LC Filter needed. Built-in STOSD8 can support Plug & Play, no complicated settings needed.

Specifications:

• Input: 8~21V (3-5S LiPo)
• -4X30A (Max.4x35A)
• 2A,
• 0.5A(Linear regulator)
• Current sensor 140A
• Built-in STOSD8
• 51x36x4mm, 9g
• Mounting holes 30.5mm Ø3mm

BEC 5V

• 5.0 +/-0.1v DC
• 2A Cont.(Max.2.5A)

BEC 12V

• Linear regulator
• 12V +/-0.3V DC
• 500mA Cont. @4S IN
• BEC power indicators
• STOPSD indicator(Blue)

BEC 5V outputs

• Designed for RC Receivers, Flight controllers, OSD, and Servos.
• DC/DC synchronous buck regulator.
• Voltage: 5.0 +/- 0.1VDC
• Continuous current: 2 Amps (Max.2.5A 10s/minute)
• Output Ripple: 40mV (VIn=16V, [email protected] load)
• Short-circuit tolerant (5 seconds/minute)

STOSD8 

• Autodetect PAL/NTSC
• Dynamic on screen info
• Automatic flight timer
• Low battery alarm
• Exceeding mAh alarm
• Min.voltage & Max.current recorder
• Onscreen Pilot ID
• Firmware upgradable
• Simple GUI & setting
• Plug & Play