MATEK F411-WTE WING FLIGHT CONTROLLER

Featured packed wing flight controller from Matek that is INAV ready, plenty of UARTS, and 6 PWM output channels.

SPECIFICATIONS

• MCU: 100MHz STM32F411CEU6
• IMU: BMI270 (SPI)
• Barometer: SPL06-001 (I2C)
• OSD: AT7456E (SPI)
• Blackbox: No
• Uarts: 2
• Full Softserial: 2
• PWM outputs: 6 (2x Motors, 4x Servos)
• I2C: 1
• ADC: 4 (VBAT, Current, RSSI, AirSpeed)
• LEDs for FC STATUS: 3 (Blue, Red) and 3.3V indicator(Red)
• Built in inverter on UART2-RX for SBUS input
• Switchable Dual Camera Inputs
• Vbat power ON/OFF switchable for VTX and camera
• PPM receiver: not supported
• Dimensions: 31x26x16.5mm
• Mounting Pattern: 22x22mm, M2

Power

• 6~30V DC IN (2~6S LiPo)
• 132A Current Sense (Scale 250)
• PDB/Current sense resistor: 90A continuous, 132A burst.
• BEC 5V 1.5A for FC & Peripherals
• BEC Vx 5A for servos, 5V/ 6V option
• Vbat for VTX and camera (ON/OFF switchable)
• LDO 3.3V 200mA
• Battery Voltage Sensor: 1k:10k

FC Firmware

• INAV Target: MATEKF411TE ( INAV4.1 or newer)

INCLUDES

• 1x Matek F411-WTE Wing Flight Controller
• 1x Pin set