Flywoo GOKU GN722 HD EVO 40A AIO DJI PLUG & PLAY O3 Air unit （20x20 ）

Use powerful F722 chip and BLHELI_S ESC firmware, integrate 5V/9V dual BEC, barometer, black box, WS2812LED, support 7 complete hardware serial ports, I2C and other functions are all open.
 

Specifications

• MCU: STM32F722 32bit processor,216MHz, 512Kbytes Flash
• IMU: ICM42688
• Barometer: BMP280
• Onboard LED：WS2812*4
• USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
• 6 hardware UARTS (UART1,2,3,4,5,6)
• Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only.
• PPM and PWM receivers are not supported.
• Onbord 16Mbytes for Blackbox logging
• 9V Power Out: 1.5A max
• 5V Power Out: 2.0A max
• 3.3V Power Out: 0.5A max
• Dimensions: 41x32mm
• Mounting Holes: Standard 20mm square to center of holes
• Weight: 8.5g
   
• Built-in 40A BL_S 4in1 ESC
• Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300,Dshot600
• Input Voltage: 2-6S Lipo
• Continuous Current: 40A
• Firmware: BLHELI_8

Q&A : 
1、 Betaflight Firmware target: FLYWOOF7DUAL
2、INAV Firmware target: FLYWOOF7DUAL
3、GOKU GN722 HD EVO 40A AIO  Wiring Diagram  : ( LINK )