Matek H743-MINI Flight Controller

About this product

The Matek H743-Mini V3 FC is a powerful flight controller using the HSTM32H743VIT6 MCU running at 480MHz. It is matched with dual gyros ( ICM42688P & ICM42605 ), an Infineon DPS310 barometer, and 11 PWM outputs. Measuring 36x28x6.5mm, this is a full-featured and very worthy choice for anyone looking for a flight controller that can work on quads or wings.

UPDATE

IMU ICM42688P, ICM42605, PWM 1~8, 10~11

Features

Suitable for both quads and wings
Uses HSTM32H743VIT6 MCU running at 480MHz

MATEK H743-MINI V3 20X20 FLIGHT CONTROLLER

Specifications

MCU: STM32H743VIT6, 480MHz , 1MB RAM, 2MB Flash
Board V3 IMU: ICM42688-P (SPI1) & ICM42605 (SPI4)
Baro: Infineon DPS310 (I2C2)
OSD: AT7456E (SPI2)
Blackbox: MicroSD card socket (SDIO)
5.5x Uarts (1,2,4,6,7, Rx8)
11x PWM outputs
2x I2C (I2C1/DA1 CL1 pads, no I2C2 breakout)
1x CAN (C-H, C-L pads)
5x ADC (VBAT, Current, RSSI, VB2, CU2)
3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
1x JST-SH1.0_8pin connector (Vbat/G/Curr/Rx8/S1/S2/S3/S4)
Dual Camera Inputs switch
8V power ON/OFF switch

Mounting

20 x 20mm/Φ3mm with Silicon Grommets
20 x 20mm/Φ2mm with Silicon & Brass Grommets

Dimensions: 36 x 28 x 6.5mm
Weight: 7g

POWER

Vbat Input: 6.3~36V (2~8S LiPo)
BEC: 5V 1.5A cont. (Max.2A)
BEC: 8V 1.5A cont. (Max.2A), 8V outputs stable when Vbat>=10V, 8V outputs 80% of Vbat when Vbat< 10V
LDO 3.3V: 200mA
VB2 pad supports Max. 69V (voltage divider 1K:20K)
Static power: 200mA@5V with Betaflight, 150mA@5V with ArduPilot

FC Firmware