Matek F722-WING Flight Controller

 

FC Specifications

• MCU: 216MHz STM32F722RET6
• IMU: MPU6000 (SPI)
• Baro: BMP280 (I2C)
• OSD: AT7456E (SPI)
• Blackbox: MicroSD card slot (SPI)
• 5x Uarts (1,2,3,4,6) with built-in inversion
• 1x Softserial-Tx
• 2x Motors, 6x Servos outputs
• 1x I2C
• 4x ADC (VBAT, Current, RSSI, AirSpeed)
• 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
• Switchable Dual Camera Inputs
• Switchable 5V/9V for Camera/VTX
• High-precision Current Sense
• TR/SA VTX control: Yes
• WS2812 Led Strip : Yes
• Beeper : Yes
• RSSI: Yes
• Analog Airspeed sensor: Yes
• Digital Airspeed sensor: Yes

FC Firmware

• INAV Flight/BetaFlight
• Target: MATEKF722SE

PDB

• Input voltage range: 9~36V (3~6S LiPo) w/TVS protection
• 2x ESC power pads
• Battery Voltage Sensor: 1:10 (Scale 1100)
• Current Senor: 132A,  3.3V ADC,  Scale 250

BEC 5V output

• Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
• Continuous current: 2 Amps, Max.3A

BEC 9V /12V output

• Designed for Video Transmitter, Camera, Gimbal ect.
• Continuous current: 2 Amps, Max.3A
• 12V option with Jumper pad

BEC Vx output

• Designed for Servos
• Voltage adjustable, 5V Default, 6V or 7.2V via jumper
• Continuous current: 5 Amps, Max.6A
• Output Ripple: 50mV (VIn=24V, VOut=5V@5A load)

BEC 3.3V output

• Designed for Baro / Compass module and Spektrum RX
• Linear Regulator
• Continuous current: 200mA

Physical

• Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
• Dimensions: 54 x 36 x 13 mm
• Weight: 25g

 

 

	F722-WING	F405-WING	F411-WING
MCU	216MHz STM32F722	168MHz STM32F405	100MHz STM32F411
IMU	MP6000	MP6000	MP6000
BARO	BMP280	BMP280	BMP280
OSD	AT7456E	AT7456E	AT7456E
BlackBox	MicroSD	MicroSD	/
Firmware	INAV BetaFlight	INAV ArduPilot	INAV BetaFlight
Dual Camera In	Yes	/	/
5V/9V Switcher	Yes	/	/
Current Sense	High precision 132A	104A	78A
Max.Voltage	36V(8S)	30V(6S)	30V(6S)
Motors	2	2	2
Servos	6	7	5
UART	5	6	2
Softserial	1	1	1
Uart Inversion	All	RX2	RX1
5V for FC	2A	2A	2A
9V for VTX	2A	2A	/
Vx for Servos	5A	5A	3A
LDO 3.3V	200mA	500mA	200mA
Size	54×36	56×36	41×28
Weight	25g	25g	12g