EMAX 2255 CW, CCW CARBON FIBER PROPELLERS (TM)

EMAX 2255 CW, CCW CARBON FIBER PROPELLERS (TM)

ImmersionRC EzUHF Transmitter with 4 Channel Receiver

ImmersionRC EzUHF Transmitter with 4 Channel Receiver

ImmersionRC EzUHF Transmitter with 8-channel Diversity Receiver

was ₹36,460.00 Special Price ₹31,025.00

* Price is inclusive of 18% GST

Availability: Out of stock
Out of stock
SKU
B81563
ImmersionRC EzUHF Transmitter 
 
The EzUHF transmitter is a true powerhouse with a wealth of connectivity broadening the horizon for each FPV pilot. Headtracking support has now been taken out of the hands of the RC transmitter and is exclusively handled by theEzUHF transmitter, so any radio can be used with your TrackR2 now. Support for any radio battery voltage is guaranteed as well, as the EzUHF transmitter has a power-in jack which will accept a 3S LiPo, so no soldering in your RCtransmitter is required. For Futaba systems using a 9.6V battery or 3S LiPo the EzUHF transmitter can be powered directly from it, with just a single cable. The battery voltage, either from the external battery, or provided by the radio,obviously is monitored and an audible alarm will sound when the battery gets low.
 
The EzUHF transmitter also comes with a power boost switch, which boosts the power if you happen to put yourself in a tight spot and need to regain control.
 
  • Reliable FHSS Link (Frequency Hopping, Spread Spectrum)
  • 433MHz/70cm Ham band operation
  • GFSK modulation
  • 600mW (~28dBm) output power
  • Direct head-tracker input, adding head-tracker compatibility to most radios
  • Power switch, boost power when at long range
  • Standard SMA antenna connector, compatibility with 70cm antennas
  • Flexible buffered, AC-coupled, PPM input, ensures compatibility with 3.3v thru 9.6v PPM levels
  • Standard USB port (Mini-A) for firmware upgrades, and system configuration
  • Single pushbutton learning of failsafe positions
  • Binding function, which allows binding Single Tx->Rx, Multi Tx->Rx, and Single Tx->Multi Rx
  • Mates with 8 channel, and 4 channel EzUHF receivers
  • Power sourced directly from the R/C Tx (Futaba), or optional DC power jack
  • Built in receiver, for future expansion
  • Custom extruded brushed aluminum enclosure



ImmersionRC EzUHF 8-channel Diversity Receiver

The EzUHF 8 channel diversity receiver  is a compact 8CH receiver for use with the ImmersionRC EzUHF system. It can provide long range control of your FPV model with the robust interference rejection that diversity antennas provide

Compact Long-Range R/C Receiver 

Ideal companion to the EzUHF transmitter. Sensitive receiver, with twin antenna inputs, in a diversity configuration. Fits the most slender of glider fuselages.

Interference Rejection

Each antenna input contains a 7-section ceramic low-pass filter, which silences interference from nearby high-power video transmitters on 900/1.2/2.4/… bands. Attenuation at 900MHz is > 40dB, at 2.4GHz > 75dB, right at the antenna input.

Mikrokopter Compatibility
Programmable MK mode, emits raw PPM on a chosen channel. The EzUHF Rx is an ideal receiver to use on Mikrokopters used for longer-range flights.
The ceramic filtering is a huge benefit on a small MK frame, which has a Video Tx antenna nearby.


EzLink connection to an EzOSD 
No more guessing! the EzLink cable connects the EzUHF to an EzOSD on-screen display. All critical parameters are sent to the OSD, which displays them live on the display and downlinks them along with the antenna-tracking telemetry.

A ground-based EzAntennaTracker displays the parameters on its LCD display, and the ImmersionPlayer application plots them on its Google-Earth™ overlay.

* Why ‘Bi-directional ready’?: The EzUHF Transmitter is a full transceiver, i.e. it includes both transmitter, and receiver hardware. The 8 Channel receiver is also a transceiver, so both are capable of bi-directional communications. Firmware to take advantage of these capabilities will available in the near future, both are field-upgradable using a std. USB cable.
EzUHF Long-Range R/C Receiver, 8 Channel Compact, Sensitive, Diversity…

Features:
• Reliable FHSS Link (Frequency Hopping, Spread Spectrum)
• 433MHz/70cm Ham band operation
• -112dBm Sensitivity
• Bi-directional ready * (contains onboard transmitter)
• Diversity Antenna configuration
• Ceramic filtered inputs, eliminates nearby high-power video Tx interference
• Mikrokopter mode, emits PPM on a chosen channel
• Vehicle mode, couples two chosen channels (ideal for coupling steering servos on monster trucks)
• USB Connection for easy firmware upgrades, and advanced configuration
• EzLink connection to a EzOSD, providing in-flight display, and telemetry down-linked parameters:
 -RSSI Ant. 1, Ant 2
 -Frequency Error
 -SNR for each freq. bin
 -Link Quality
• Standard SMA antenna connectors, compatibility with standard 433/70cm band antennas
• 8 standard servo connectors
• Failsafe, preset by button on the EzUHF transmitter

Specs:
Power Requirements: 4.8~6V, 35mA (Rx mode), 95mA (Tx mode)
Dimensions: 70x28x18mm
Weight: 19g

 

Package Includes:

1 X ImmersionRC EzUHF Transmitter 

1 X ImmersionRC EzUHF 8-channel Diversity Receiver

More Information
Type Combo