BetaFPV 0603 19000KV 1S Brushless Motors (4PCS)

These motors are the stock motors for the Beta65 Pro 1S brushless drone. 
Note: There are two KV for 0603 motors. 

RECOMMENDED PARTS

• Propellers: 31mm 4-blade props
• Motors: 0603 brushless motors (Just this)
• Batteries: 260mAh 1S Lipo HV batteries
• Frame: Beta65 Pro frame

Really not recommend the 0703 motors with a 65mm frame ( like Beta65 Pro frame or BWhoop B06 etc). Why? The combo of 0703 motors and 31mm props (for 65mm frame) has a really low efficiency. Really not power enough. For the 65mm 1S brushless drone, high recommend these 0603 motors.

Here is the testing result of different motors and frames combo.

•  Throttle value means the position when the drone hovers in the air.
• Flying time is the time from OSD voltage value 4.3V->2.8V.
• All tested with 4-blades props. 31mm props or 40mm props.
• All throttle values are tested on full charged 550mAh batteries.
• The KV value of 0703/0603 motors are both 15000KV.

SPECIFICATION

• Plug：Micro JST-1.25 3-pins connector
• Height: 16.2mm
• Width: 9mm
• Weight: 1.6g ( with connector)
• Shaft: φ1.0mm
• KV (rpm/V): 16000KV / 19000KV
• Voltage: 3.7-7.4V
• Battery: 1S lipo battery (2S is not recommended)
• Load Current: 1.8-3.8A
• Pull: 23-40g
• Power: 6.7-28W
• Efficient: 3.4-1.4g/W
• Usage: for 1S brushless multirotor like Beta65 Pro or BWhoop B06 etc

If you occur the issue of motor not spin up properly, go to BETAFPV Support Freshdesk for Troubleshooting - Motor Doesn't Spin. 

PACKAGE

• 4 * BETAFPV 0603 19000KV Brushless Motors
• Some M1.6x4 screws (Fit for Beta65 Pro and Beta75 Pro frame)