S500 PCB QUADCOPTER FRAME KIT
2) FlySky FS-i6 2.4G 6CH AFHDS RC Transmitter With FS-iA6 Receiver
Description:
Brand Name:Flysky
FS-i6 Specifications:
Channels: 6 Channels
Model Type: Glider/Heli/Airplane
RF Range: 2.40-2.48GHz
Bandwidth: 500KHz
Band: 142
RF Power: Less Than 20dBm
2.4ghz System: AFHDS 2A and AFHDS
Code Type: GFSK
Sensitivity: 1024
Low Voltage Warning: less than 4.2V
DSC Port: PS2;Output:PPM
Charger Port: No
ANT length: 26mm*2(dual antenna)
Weight:392g
Power: 6V 1.5AA*4
Display mode: Transflective STN positive type, 128*64 dot matrix VA73*39mm,white backlight.
Size: 174x89x190mm
On-line update:yes
Color: Black
Certificate: CE0678,FCC
i-BUS port: NO
Data Acquisition port:NO
Model Memories: 20
Channel Order: Aileron-CH1, Elevator-CH2, Throttle-CH3, Rudder-CH4,Ch 5 & 6 open to assignment to other functions.
Features:
Works in the frequency range of 2.405 to 2.475GHz.This band has been divided into 142 independent channels,each radio system uses 16 different channels and 160 different types of hopping algorithm.
This radio system uses a high gain and high quality multi directional antenna,it covers the whole frequency band. Associated with a high sensitivity receiver,this radio system guarantees a jamming free long range radio transmission
Each transmitter has a unique ID,when binding with a receiver,the receiver saves that unique ID and can accepts only data from the unique transmitter.this avoids picking another transmitter signal and dramatically increase interference immunity and safety.
This radio system uses low power electronic components and sensitive receiver chip.The RF modulation uses intermittent signal thus reducing even more power consumption.
AFHDS2A system has the automatic identification function,which can switch automatically current mode between single-way communication mode and two-way communication mode according to the customer needs.
AFHDS2A has built-in multiple channel coding and error-correction,which improve the stability of the communication,reduce the error ratio and extend the reliable transmission distance.
Package Included:
1 x FS-i6 transmitter( color box)
1 x Receiver
1 x Manual
3) DJI Naza-M Lite Multi-Rotor Flight Controller With GPS WITH NEW LED
For entry-level enthusiasts, DJI now brings out the most cost-effective solution, the NAZA-M Lite flight control system. As the simplified version of NAZA-M, it inherits the high reliability and stability of NAZA-M in a basic package offering a very competitive price. The innovative All-in-One design simplifies installation and saves space and weight. It contains inner damping, controllers, 3-axis gyroscope, 3-axis accelerometer and barometer in its light and small Main Controller. It can measure flying altitude, attitude and therefore can be used for autopilot/automatic control.
The included plug and play GPS module will greatly enhance the performance for aerial photography with accurate Position Hold, Return-To-Home and Intelligent Orientation Control functionalities. With the GPS Module, the multi-rotor will have position and altitude locked accurately even in windy conditions. Hovering accuracy is approximately 2.5m horizontal and 0.8m vertical.
The advanced attitude stabilization algorithm not only inherits the outstanding flight stability of DJI products, but also provides excellent maneuverability. It is more flexible and stable, and gives the hobbyists a wonderful flight experience.
Features:
• All-in-One Design
• GPS Module Available/Accurate Position Hold
• Low Voltage Protection
• 6 Supported Multi-rotor Types
• Advanced Attitude Stabilize Algorithm
• Intelligent Orientation Control (IOC)
• Motor Arm and Motor Dis-arm
• Built-in Gimbal Stabilization Function
• Multiple Flight Control Mode/Intelligent Switching
• Failsafe Mode
• Support Futaba S-Bus and PPM Receiver
• Remote Adjustment
Included:
Naza-M Lite Main Controller
DJI GPS/Compass Module
DJI V-SEN LED Module
USB Data Cable
All necessary mounting hardware/connection leads
Specs:
Supported Multi-Rotor: Quad-rotor I4, X4, Hex-rotor I6, X6, IY6, Y6
Supported ESC output: 400Hz refresh frequency
Recommended Transmitter: PCM or 2.4GHz with minimum 4 channels
Working Voltage Range: MC: 4.8V~5.5V, VU Input: 7.4V~26.0V (recommended 2S~6S Lipoly)
Power Consumption: MAX: 1.5W (0.3A @ 5V), Normal: 0.6W (0.12A @ 5V)
Operating Temperature: -10°C ~ 50°C
Assistant Software System Requirement: Windows XP sp3/Windows 7/Windows 8
Dimensions: MC: 45.5x31.5x18.5mm, VU: 32.2x21.1x7.7mm, GPS & Compass: 46mm (diameter)x9mm
Weight: MC: 25g, VU: 20g, GPS: 21.3g
Flight Performance:
Hovering Accuracy (GPS Mode): Vertical: +/-0.8m, Horizontal: +/-2.5m
Max Yaw Angular Velocity: 200°/s
Max Tilt Angle: 45°
Ascent/Descent: +/-6m/s
4) SunnySky X2212 KV980 Brushless Motor (Original)
Description:
Item Name: SunnySky X2212 KV980 Brushless Motor
KV: 980
Non-load current: 10V/0.3A
Lipo Battery (cell): 2S-3S Li-poly
Weight: 56g
Length: 30mm
Diameter: 27.5mm
Prop adaptor Shaft Diameter(mm): 5 Test data(for reference only)
Propeller (in)
|
Volts(v)
|
Amps (A)
|
Thrust(G)
|
Rpm/min
|
Power(W)
|
Efficiency(G/W)
|
1047
|
11.1
|
13.2
|
870
|
7100
|
146.5
|
5.93
|
1047
|
10
|
11.2
|
720
|
6580
|
112
|
6.42
|
1047
|
8
|
8.2
|
520
|
5630
|
65.6
|
7.9
|
1047
|
7.4
|
7.4
|
480
|
5360
|
54.7
|
8.77
|
1145
|
11.1
|
17.2
|
960
|
5830
|
190.9
|
5.02
|
1145
|
10
|
14.2
|
880
|
5500
|
142
|
6.19
|
1145
|
8.5
|
12
|
680
|
5000
|
102
|
6.66
|
9047
|
12
|
11
|
740
|
8400
|
132
|
5.6
|
9047
|
11.1
|
9.6
|
680
|
7900
|
106.5
|
6.38
|
9047
|
10
|
8.2
|
560
|
7380
|
82
|
6.82
|
9047
|
8.5
|
6.5
|
420
|
6520
|
55
|
7.63
|
Long-life Japanese NMB ball bearings. Efficient Japanese Kawasaki stator steel Rare earth magnets stable up to 180 centigrade Oxygen free pure copper wires CNC machined aluminum case Silicone wire leads Patented balance techniques Unique wiring method.
Package Included:
1 x SunnySky X2212 KV980 Brushless Motor
1 x Motor set
5) HobbyWing XRotor 20A ESC
Specification:
Brand:Hobbywing
Model Number:XRotor-20A
Cont.Current:20A
Burst Current(10sec):30A
BEC:None
Lipo:3-4S
Programming:Timing(high/middle)
Weight:14g
Size:52.4x21.5x7mm
Plug:Φ3.5mmx3
Usage:RC Multicopter
Features: - Using Multicopter special program, fast throttle response,surpasses all kinds of open source software; - Firmware was optimized specifically for disc motor, and it has a very good compatibility; - Highly intelligent, strong adaptive capacity, reserve the timing setting item (height/middle timing), easy to use; - Throttle signal line is twisted wire to reduce crosstalk within the transmission signal generated by the copper, so that more stable flight; - Supports refresh rates up to 621Hz throttle signal, compatible with various flight controllers. (Note: the throttle signal over 500Hz are all non-standard throttle signal); - Using MOSFET special driver IC, its performance and stability far surpass the driving circuit with discrete components built; - Ultra-low resistance MOSFET, strong flow capacity.
Package Included:
1x Hobbywing XRotor 20A brushless ESC
6)SKYRC S60 CHARGER
Dimersions | |||
Net Weight | 310g | ||
Input Voltage | AC100-240V | ||
Charge Circuit Power | Max. 60W | ||
Discharge Circuit Power | 10W | ||
Charge Current Range | 0.1-6A | ||
Discharge Current Range | 0.1-2A | ||
Current Drian for Balancing Port | Max 200mA/cell | ||
Trickle Charging Current | 50mA-300mA & OFF | ||
LiPo/LiFe/Lilon/LiHV Battery Cell Count | 2-4S | ||
NiMH/NiCd Battery Cell Count | 6-8S | ||
Pb Battery Voltage | 6-12V |
7)GENS ACE 5500mah 3S1P 11.1V 25C Lipo battery pack with deans connector
- GENS ACE 5500mah 3S1P 11.1V 25C Lipo battery pack with deans
connectorCapacity:for GENS ACE 5500mah 3S1P 11.1V 25C Lipo battery pack with deans connector
5500MAH - Voltage: 11.1V
- Size: 185* 45 * 20mm (L * W * H)GENS ACE 5500mah 3S1P 11.1V 25C Lipo battery pack with deans connector
- Weight: 404g
- Discharge rate: 25C Continuous, 50C Burst(GENS ACE 5500mah 3S1P 11.1V 25C Lipo battery pack with deans connector)
- Charge rate: 5C charging acceptable(GENS ACE 5500mah 3S1P 11.1V 25C Lipo battery pack with deans connector)
- Plug: Banana 4.0
- Application : Acepow Gens ace 5500mah 22.2V (6S1P) 25C high discharge rate, able to be charged by 5C! Suitable for Graupner HYDRO DRAGSTAR racing boat model.(GENS ACE 5500mah 3S1P 11.1V 25C Lipo battery pack with deans connector)
Gens Ace is one of the top rank battery corporations with deep research and manufacturing on NIMH, LI-PO, LI-FE by the effort of 200 professional engineers and technicians with 20 years exquisite battery technology. The Gens Ace brand holds the traditional concept of "excellent quality", "Optimization"& "Priority" on Sales & Services. All batteries are tailored for various scales of the RC Models such as electronic cars, nitro cars, aero planes, vessels and also other models, toys, electric tools, electric bikes, electric autos, digital products etc.
8)HQProp 1045G MultiRotor CCW Green (2 pcs per pack)
Details:
B is black, O is orange, G is green, R is red, L is blue.
Props with B、O、G is made of Glass fiber composte, Others are made of Carbon mixed composite.
Note:Includes 2pcs per pack of CCW rotation. 10" good quality propellers which helps to provides a flyer an experience of a safe and steady flight. HQProp 1045G MultiRotor CCW Green (2 pcs per pack)
9) HQProp 1045RG MULTIROTOR CW Green (2 pcs per pack)
Details:
B is black, O is orange, G is green, R is red, L is blue.
Props with B、O、G is made of Glass fiber composte, Others are made of Carbon mixed composite.
Note:Includes 2pcs per pack of CW rotation. 10" good quality propellers which helps to provides a flyer an experience of a safe and steady flight HQProp 1045RG MULTIROTOR CW Green (2 pcs per pack)
Kit Package Included:
- 1 x S500 PCB FRAME
- 1 x FS-i6 transmitter
-
1 x Naza-M Lite
-
4 x SunnySky X2212 KV980 Brushless Motor
-
4 x Hobbywing XRotor 20A brushless ESC
-
1*GENS ACE 5500mah 3S1P 11.1V 25C Lipo battery pack with deans connector
-
1*SKYRC S60 CHARGER
-
1x HQProp 1045RG MULTIROTOR CW Green (2 pcs per pack)
-
1x HQProp 1045G MultiRotor CCW Green (2 pcs per pack)
Kits | ARF kits |
---|