BetaFPV 0603 19000KV 1S Brushless Motors (4PCS)

BetaFPV 0603 19000KV 1S Brushless Motors (4PCS)

2pcs KingKong 720 Brushed Motor Brush CW CCW for Tiny7 Racing Quadcopter

2pcs KingKong 720 Brushed Motor Brush CW CCW for Tiny7 Racing Quadcopter

BetaFPV 0703 19000KV 1S Brushless Motors (4PCS)

was ₹2,153.00 Special Price ₹1,999.99

* Price is inclusive of 18% GST

Availability: Out of stock
Out of stock
SKU
L82213

These motors are the stock motors for the Beta75 Pro 1S brushless drone.
Note: There are two KV for 0703 motors. 

0703 Model Wire Color Version  Welding
15000KV Yellow & Red & Black Upgraded Bottom ring and shaft are welded together
19000KV Red (CW) & Black (CCW) Latest E-clip

    

     Recommended Parts

Really not recommend the these 0703 motors with a 65mm frame ( like Beta65 Pro frame or BWhoop B06 etc). Why? The combo of 0703 motors and 31mm props (for 65mm frame) has a really low efficiency. Really not power enough. For the 65mm 1S brushless drone, recommend the 0603 motors.

Here is the testing result of different motors and frames combo.

  •  Throttle value means the position when the drone hovers in the air.
  • Flying time is the time from OSD voltage value 4.3V->2.8V.
  • All tested with 4-blades props. 31mm props or 40mm props.
  • All throttle values are tested on full charged 550mAh batteries.
  • The KV value of 0703/0603 motors are both 15000KV.

SPECIFICATION

  • Plug:Micro JST-1.25 3-pins connector
  • Height: 16.2mm
  • Width: 10mm
  • Weight: 2.1g ( with connector)
  • Shaft: φ1.0mm
  • KV (rpm/V): 15000KV / 19000KV
  • Voltage: 3.7-7.4V
  • Battery: 1S lipo battery (2S is not recommended)
  • Load Current: 1.8-3.8A
  • Pull: 23-40g
  • Power: 6.7-28W
  • Efficient: 3.4-1.4g/W
  • Usage: for 1S brushless multirotor like Beta75 Pro or BWhoop B06 etc

If you occur the issue of motor not spin up properly, go to BETAFPV Support Freshdesk for Troubleshooting - Motor Doesn't Spin

PACKAGE

  • 4 * BETAFPV 0703 19000KV Brushless Motors / 19000KV Brushless Motors
  • Some M1.6x4 screws (Fit for Beta65 Pro and Beta75 Pro frame)