Flysky 2.4G CT6B TX 6CH Radio control

Flysky 2.4G CT6B TX 6CH Radio control

FlySky FS-i6 2.4G 6CH AFHDS RC Transmitter With FS-iA6B Receiver

FlySky FS-i6 2.4G 6CH AFHDS RC Transmitter With FS-iA6B Receiver

Flysky 9x 2.4GHz 9CH Transmitter WITH RECEIVER (Mode 2)

short desc
was ₹7,716.80 Special Price ₹4,499.99

* Price is inclusive of 18% GST

Availability: Out of stock
Out of stock
SKU
L7505

FS-Th9X has revolutionized the way people experience RC, and now this radio transmitter can stand up to the top competitions.
AFHDS (automatic frequency hopping digital system), is developed by FLYSKY for all the Radio Control model lovers and is patented by FLYSKY at home. The system is specially developed for all the Radio control models, that offers super active and passive anti-jamming capabilities, very low power consumption and high receiver sensitivity. With extreme rigorous testing by engineers and studying the markets for years, FLYSKY AFHDS is now considered to be the one of the best systems available in the market.

2.4GHz is the standard of new generation radio system because it has a lot of advantages. Operating at 2.4 GHz puts the radio control out of the frequency range of any 'noise' generated by the other electronic components on your helicopter - such as the brushless motor, Electronic speed controller, Servos and any metal to metal noise - eliminating interference and glitching that can affect traditional frequency system.

 

Description:
Brand Name: FlySky
Item Name: FS-TH9X 2.4G 9CH Transmitter
Channels: 9 Channels
Model Type: quadcopter,glider, helicopter, airplane, also car or boat
RF Range: 2.40-2.48GHz
Bandwidth: 500Hz
Band: 160
RF Power: less than 20DB
2.4G System: AFHDS
Modulation: GFSK
Code Type: PPM/PCM
Senditivity: 1024
LCD Type: 128 x 64 dot
LCD Backlight: No
Low Voltage Warning: yes(less than 9V)
DSC Port: yes(3.5mm:output:PPM)
Charger Port: yes
Size: 180 x 220 x 70 mm
Power: 12VDC or 8 x 1.5AA
Weight: 670g
Mode: Mode 2
Control Range: 350-400m

Model Memory: 8

The transmitter functions:
Throttle curves
Pitch curves
Endpoint adjustments
Subtrim
Swash AFR mixes
Servo reversing
Timer
Dual rate
Exponential
Flaperons
V-Tail mixing
Elevons

Flysky 
FS-R9B 2.4G Receiver:
Product Number: FS-R9B

Channels: 8 Channels

Receiving Sensitivity: -105dBm
Frequency Range: 2.4-2.48GHz
Frequency Width: 500KHz
Wave Band: 160
Modulation: GFSK
2.4G Mode: Automatic FM digital system
Channel Resolution: 1024 classes
Power: 4.0-6.55V DC
Weight: 18g
Antenna Length: 26mm
Size: 52*35*15mm
Color: Grey
Certificate: CE,FCC


How to bind the RX (receiver) to the TX (transmitter):
1. Plug bind plug into BAT, turn on plane/heli, the LED light should flash (make sure power is connected to RX via ESC)
2. Hold down bind button on transmitter module while turning on the TX
3. The light should go steady now
4. Let go of bind button, turn off plane/heli, remove bind plug, turn off TX
5. Turn on TX and then turn on plane/heli


Note: 

If you need to connect the transmitter to a Lipo battery,please pay attention to the positive and negative of the interface,and connect the battery to the two pins on the left.

Package Included:
1 x FlySky FS-TH9X 2.4G 9CH Transmitter Mode 2
1 x FS-R9B 8CH 2.4GHz Receiver
1 x 
RM002 2.4GHz Module
1 x Bind Plug

More Information
Type Radio
Brand Flysky