" Due to COVID - 19 WE DO NOT GURANTEE DELIVERY TIME . WE DO NOT PROVIDE ANY TYPE OF GUARANTEE OR WARRANTY FOR ALL PRODUCTS . NO RETURNS / REPLACEMNENT/CANCELLATION . CLUBBING OF TWO ORDERS OR MODIFYING ALREADY PLACED ORDER IS NOT POSSIBLE ."

Pixhack V2

Pixhack V2

FrSky XSRF4O OSD Flight Controller Integrate with FrSky XSR Receiver

FrSky XSRF4O OSD Flight Controller Integrate with FrSky XSR Receiver

CUAV Pixhack V3

was ₹15,050.00 Special Price ₹12,077.00
Availability: In stock
In stock
SKU
F81823

 

Pixhack V3

 

The CUAV Pixhack V3 flight controller board is a flexible autopilot intended primarily for manufacturers of commercial systems.

 

The board is a variant of the SOLO Pixhawk® 2 (PH2) flight controller, which is in turn based on the Pixhawk-project FMUv3 open hardware design. It runs PX4 on the NuttX OS, and is fully compatible with both PX4 or ArduPilot® (APM) firmware.

 

Pixhack V3 has significant improvements with respect to the original design, including better interface layout and the addition of vibration damping and a thermostat system.

 

Pixhack v3

 

Specs

 

  • Microprocessor:
    • STM32F427
    • STM32F100 (Failsafe co-processor)
  • Sensors:
    • Accelerometers (3): LS303D, MPU6000, MPU9250/hmc5983
    • Gyroscopes (3): L3GD20, MPU6000, MPU9250
    • Compass (2): LS303D, MPU9250
    • Barometer (2): MS5611 X2
  • Interfaces:
    • MAVLink UART (2)
    • GPS UART (2)
    • DEBUG UART (1)
    • RC IN (for PPM, SBUS, DSM/DSM2)
    • RSSI IN: PWM OR 3.3ADC
    • I2C (2)
    • CAN BUS (1)
    • ADC IN: 3.3V X1 , 6.6V X1
    • PWM OUT: 8 PWM IO + 4 IO
  • Power System:
    • PM POWER IN: 4.5 ~ 5.5 V
    • USB POWER IN: 5.0 V +- 0.25v
  • Weight and Dimensions:Other Characteristics:
    • Weight: 63g
    • Width: 68mm
    • Thickness: 17mm
    • Length: 44mm
  • Operating temperature: -20 ~ 60°C

 

Package Includes : -

  •  Pixhack V3 x1
  •  Vibration damper plate x1
  •  8gb micro sd card x1
  •  USB cable x1
  •  8CH PPM encoder x1
  •  Voltage and current sensor x1
  •  I2C extension board X1
  •  Buzzer with safety switch x1
  •  PW WIFI Link (without case ) x1
  •  Cable x2

HTB1WF7RXf2H8KJjy0Fcq6yDlFXaD.jpg?size=7


201709460
 

HTB1t4y.XdLO8KJjSZPcq6yV0FXaN.jpg?size=5

More Information
Type Flight Controller
Write Your Own Review
You're reviewing:CUAV Pixhack V3
Your Rating