SAM 220 ARF kit
(1) SAM 220 Frame
The SAM 220 is a sexy and minimalistic quadcopter frame. The frame is very light, only 90g. The frame is durable enough to sustain some pretty hard crashes. Another great thing about this frame is that there are only 16 screws to take apart when you need to rebuild, It can be completely rebuilt in about 30 minutes if you explode the quad during a hard crash. This sam 220 can be compatible with Flycolor Raptor S Tower, T-MOTOR F60 motors and 5 inch propellers.
Frame Size: 220mm
Main Plate: 4mm 3K carbon
(2) KISS F3 32bit Flight Controller
KISS F3 32bit Flight Controller v1.03
These KISS Flight Controllers are designed for easy setup and use. Flyduino have taken a different approach to Flight Controllers by designing both the firmware and hardware as one package. Their purpose built firmware is designed specifically for their hardware.
The Flight Controller comes in an “H” style PCB, which is different to most flight controllers, that saves space. This is always a good thing for racing drones.
This is a high-performance F3 32bit flight controller and it will keep your drone flying at extreme pace. There is even the ability to receive live telemetry from supported ESCs. This gives all the data to tune your drone and get the best performance out of your gear.
• Hardware and software designed for each other
• F3 32bit Flight controller
• Support for multiple analog and digital receiver protocols, PPM, Spektrum Sat (Serial), SBUS, Jeti ExBus, Graupner SumD / SUmO, MultiPlex and PWM
• Live telemetry data from supported ESCs
• Download preset configurations from well-known pilots for popular drones
• Supported Copter frames - Tri, Y4, Y6, Quad +/x, Hexa +/x
MCU: STM32F303CCT6 (ARM Cortex-M4, 72MHz) F3 32bit
Voltage: 2-6S (direct, max. 5s recommended)
Mounting Holes: 3x3cm pattern with 3.2mm holes (compatible with most frame types)
(3) HobbyWing Xrotor 20A 4IN1 Micro ESC
Brand Name:Hobbywing Item Name: Micro 20A 3-4S 4-in-1 ESC Electronic Speed Control Weight: 24.5g Dimension: 56x37x7mm Battery Cell:3-4s Lipo Continuous current: 20A Instantaneous current: 25A BEC Output: 5.3V/12V,3A
--Support for Oneshot125,Oneshot42& Multishot --suit for 130-280mm Frame Kit
(4) BrotherHobby Tornado T1 2205 2300kv Brushless Motor
Brotherhobby has created these 2205 series of motors with a unique design. The bell design has a new look, the body is made of solid 7075 aluminum, and the motor itself features 2mm thick N52H arc magnets. All while only weighing 29g. With these magnets you don't need to sacrifice structural integrity for low weight, you can have both. Great response time and power for a low price.
No.of Cells (Lipo): 3-5S
Rotor: 2mm N52H arc magnets
Wiring config Single-stranded: 1 x 0.49mm 11 turns Delta DLRK
Stator: 0.15mm Nippon Steel silicon steel
Bearings: Japanese NSK
Base cap/ casing: Al 7075
1. 1x SAM 220 Frame
2. KISS F3 32bit Flight Controller
3.HobbyWing Xrotor 20A 4IN1 Micro ESC
4. 4*BrotherHobby Tornado T1 2205 2300kv Brushless Motor