• Flysky 9x 2.4GHz 9CH Transmitter WITH RECEIVER

    FS-Th9X has revolutionized the way people experience RC, and now this radio transmitter can stand up to the top competitions.
    AFHDS (automatic frequency hopping digital system), is developed by FLYSKY for all the Radio Control model lovers and is patented by FLYSKY at home. The system is specially developed for all the Radio control models, that offers super active and passive anti-jamming capabilities, very low power consumption and high receiver sensitivity. With extreme rigorous testing by engineers and studying the markets for years, FLYSKY AFHDS is now considered to be the one of the best systems available in the market.

    2.4GHz is the standard of new generation radio system because it has a lot of advantages. Operating at 2.4 GHz puts the radio control out of the frequency range of any ‘noise’ generated by the other electronic components on your helicopter – such as the brushless motor, Electronic speed controller, Servos and any metal to metal noise – eliminating interference and glitching that can affect traditional frequency system.

    Flysky 9x 2.4GHz 9CH Transmitter WITH RECEIVER

    Specifications for Flysky 9x 2.4GHz 9CH Transmitter WITH RECEIVER

    (1) channels: 9channels TH9X

    (2) model type: helicopter ,airplane, glider

    (3) RF power: less than 20db

    (4) modulation: GFSK

    (5) code type: PPM/PCM

    (6) sensitivity: 1024

    (7) lcd type: 128*64 dot

    (8) low voltage warning: yes

    (9) DSC port: yes

    (10) charger port: yes

    (11) power:12VDC(1.5AA*8)

    (12) ANT length:26mm

    Included in the box:

    Transmitter 8CH

    Receiver R8B

    Binding plug

    Features of the Radio:

    Throttle curves

    Pitch curves

    Endpoint adjustments



    AFR mixes

    Servo reversing


    Dual rate



    V-Tail mixing


    • Advanced Continuous Channel Shifting Technology (ACCST SYSTEM) achieves highly reliable link in interference rich environments.
    • Smart Port – Full Duplex communication
    • Easy to bind and instant link-up
    • Excellent reboot times
    • All channels failsafe
    • Quick response
    • Very smooth servo movement
    • Alarm on events of receiver (low battery voltages, poor reception, etc.)
    • Error-free link, by using 48bits CRC algorithm
    • Firmware upgradable


    • V8 Series: (Non-Telemetry receivers)
    • V8FR-II, V8R7-II, V8R4-II, VD5M
    • D Series: (Telemetry receivers)
    • D8R, D8R-II, D8R-II Plus, D8RSP, D8R-XP, D6FR, D4FR, D4R-II, etc.
    • X Series: (Telemetry receivers)
    • X8R, X6R, X4R, etc.
    • LR Series: (Long Range receivers)
    • L9R
    • FrSky’s X4R receiver features 4 PWM outputs (normal servo).  Plus the exciting new Smart Port and a traditional A2 port are all located on the side of the receiver. A FrSky FBVS can be connected to the A2 port for simple voltage monitoring as well as all of the Smart Port based sensors.Smaller than the X6R, but still packing the new Smart Port that works with the new hubless digital sensors.

      Note: This version of the X4R does not include the Sbus output. This is only a 4 channel receiver. No SBus and no CPPM output.

      Operating Voltage Range: 4V-10.0V
      Operating Current: [email protected]
      Operating Range: >1.5km (Full Range)
      Firmware Upgradeable

      FrSky Taranis, Taranis Plus, & XJT module

  • Additional Information

    Weight 3.5 kg